UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21586
                        
                            Issued:2008-02-22
                    
                            Revised:2012-03-30
                    
                            Style
                            21586
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac Horizontal flame.
		
			Conductor50 AWG minimum, solid or stranded round, tinned or bare.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or ground cables.  May use same or mixed AWG.  Lay not specified.  Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional, extruded FRPE, thickness not specified.
		
			BraidOptional.
		
			JacketExtruded TPU
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.425 or less3024
		
			0.426-0.7004536
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring in Class 2 circuits of electronic equipment 

                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21586	Issued:2008-02-22
			Revised:2012-03-30


Rating	80 deg C, 30 Vac Horizontal flame.

Conductor	50 AWG minimum, solid or stranded round, tinned or bare.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or ground cables. May use same or mixed AWG. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional, extruded FRPE, thickness not specified.

Braid	Optional.

Jacket	Extruded TPU
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.425 or less	30	24
	0.426-0.700	45	36
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112
	Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring in Class 2 circuits of electronic equipment