UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21595
                        
                            Issued:2008-06-20
                    
                            Revised:2012-03-31
                    
                            Style
                            21595
                        
                            Multiconductor with Extruded Insulation and Extruded Covering
                    
			Rating90 deg C, 300 Vac.
		
			Conductor36 AWG - 18 AWG min. solid or stranded round.
		
			InsulationExtruded ETFE, 9 mils min average, 8 mils min at any point
		
			Assembly2-6 individually insulated conductors or groups of conductors cabled together into a round cable.
		
			ShieldBraid (80 percent min coverage tinned or bare copper or stainless steel) or Aluminum polyester tape (min 25% overlap, 1.0 mil min thickness, with drain wire) over the individual or groups of conductors.
		
			CoveringExtruded XLHDPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc.

                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21595	Issued:2008-06-20
			Revised:2012-03-31


Rating	90 deg C, 300 Vac.

Conductor	36 AWG - 18 AWG min. solid or stranded round.

Insulation	Extruded ETFE, 9 mils min average, 8 mils min at any point

Assembly	2-6 individually insulated conductors or groups of conductors cabled together into a round cable.

Shield	Braid (80 percent min coverage tinned or bare copper or stainless steel) or Aluminum polyester tape (min 25% overlap, 1.0 mil min thickness, with drain wire) over the individual or groups of conductors.

Covering	Extruded XLHDPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc.