UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21607
                        
                            Issued:2008-10-02
                    
                            Revised:2014-05-27
                    
                            Style
                            21607
                        
                            Multiconductor Cable with extruded Non-integral Jacket
                    
			Rating90 deg C, 300 V ac.
		
			Conductor50 AWG - 19 AWG, solid or stranded round.
		
			InsulationLabeled Style 10637, ETFE 9 mils min average 8 mils minimum thickness at any point.
		
			Assembly2 conductors twisted together.
		
			ShieldStainless steel braid with minimum 85% coverage, or a tape foil minimum 1.5 mils thick 0.35 inch width with minumum 25% overlap and a drain wire.
		
			CoveringNone.
		
			BraidNone.
		
			JacketTPU - POLYURETHANE, 12 mils min average, 10 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing into Cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21607	Issued:2008-10-02
			Revised:2014-05-27


Rating	90 deg C, 300 V ac.

Conductor	50 AWG - 19 AWG, solid or stranded round.

Insulation	Labeled Style 10637, ETFE 9 mils min average 8 mils minimum thickness at any point.

Assembly	2 conductors twisted together.

Shield	Stainless steel braid with minimum 85% coverage, or a tape foil minimum 1.5 mils thick 0.35 inch width with minumum 25% overlap and a drain wire.

Covering	None.

Braid	None.

Jacket	TPU - POLYURETHANE, 12 mils min average, 10 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing into Cables.