UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21609
                        
                            Issued:2000-10-08
                    
                            Revised:2012-04-25
                    
                            Style
                            21609
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG - 10 AWG min. solid or stranded round.
		
			InsulationExtruded XLPE, 6 mils minimum average thickness and 5 mils minimum thickness at any point.
		
			AssemblyConsists of two or more insulated conductors cabled together.  The conductors or groups of conductors may be laied parallel forming a flat, oval or round cable.  The lay of the conductors is not specified.  A barrier layer and/or fillers are optional.  May use same or mixed AWG size.  Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional - A 6 mil or heavier covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU, 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21609	Issued:2000-10-08
			Revised:2012-04-25


Rating	90 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG - 10 AWG min. solid or stranded round.

Insulation	Extruded XLPE, 6 mils minimum average thickness and 5 mils minimum thickness at any point.

Assembly	Consists of two or more insulated conductors cabled together. The conductors or groups of conductors may be laied parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional - A 6 mil or heavier covering may be extruded over the conductor assembly.

Jacket	Extruded TPU, 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.