UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21613
                        
                            Issued:2008-11-25
                    
                            Revised:2018-03-07
                    
                            Style
                            21613
                        
                            Multiconductor with Labeled Insulated Conductors and an Overall Braided Shield.
                    
			Rating80 deg C, no voltage specified, Horizontal flame.
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of Assembly insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering, or thermoplastic-tape wrap.  The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.
		
			ShieldBraid
		
			Misc.Optional Binder - Thermoplastic Tape.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21613	Issued:2008-11-25
			Revised:2018-03-07


Rating	80 deg C, no voltage specified, Horizontal flame.

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of Assembly insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering, or thermoplastic-tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.

Shield	Braid

Misc.	Optional Binder - Thermoplastic Tape.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.