UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21623
                        
                            Issued:2009-03-25
                    
                            Revised:2011-11-01
                    
                            Style
                            21623
                        
                            Multi-conductor cable using non-integral jacket
                    
			Rating200 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded FEP
		
			dia under jacket in inchesMin average thickness milsMin thickness at any point mils
		
			0-0.25086
		
			0.251-0.350108
		
			0.351-0.5001310
		
			0.501-0.7001512
		
			0.701-1.5002016
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21623	Issued:2009-03-25
			Revised:2011-11-01


Rating	200 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed.

Covering	Optional.

Shield	Optional.

Jacket	Extruded FEP
	dia under jacket in inches	Min average thickness mils	Min thickness at any point mils
	0-0.250	8	6
	0.251-0.350	10	8
	0.351-0.500	13	10
	0.501-0.700	15	12
	0.701-1.500	20	16

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.