UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21635
                        
                            Issued:2009-06-05
                    
                            Revised:2011-08-05
                    
                            Style
                            21635
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating105 deg C, 600 Vac, Cable flame
		
			Conductor50 AWG - 10 AWG solid or stranded
		
			InsulationLabeled or complying with manufacturer's AWM procedure
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed
		
			ShieldBraid, in accordance with the Standard
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseExternal interconnect of appliances
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21635	Issued:2009-06-05
			Revised:2011-08-05


Rating	105 deg C, 600 Vac, Cable flame

Conductor	50 AWG - 10 AWG solid or stranded

Insulation	Labeled or complying with manufacturer's AWM procedure

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed

Shield	Braid, in accordance with the Standard

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	External interconnect of appliances