UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21637
                        
                            Issued:2009-06-19
                    
                            Revised:2011-10-18
                    
                            Style
                            21637
                        
                            Parallel Cable with extruded insulation.
                    
			Rating80 deg C, 300 Vac Horizontal flame.
		
			Conductor40 AWG - 16 AWG min. solid or stranded round, or Litz Cable Magnet Wire.  Litz cable conductor consists of single strand magnet wire, Recognized Component - Magnet Wire (OBMW2), rated a minimum of 80 deg C.  Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor.  AWG size to be determined by the DC Resistance Test per UL 1581.
		
			InsulationFRPE, 15 mils min average, 13 mils minimum at any point, before and after ripping.
		
			AssemblyTwo to 100 conductors laid parallel and in one plane with a single row of conductors having 15 mils  minimum distance between conductors. Same or mixed sizes of conductors.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.  The following user instructions shall be plainly marked on the tag or reels as follows: "Litz conductors are manufactured using solderable magnet wire".
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21637	Issued:2009-06-19
			Revised:2011-10-18


Rating	80 deg C, 300 Vac Horizontal flame.

Conductor	40 AWG - 16 AWG min. solid or stranded round, or Litz Cable Magnet Wire. Litz cable conductor consists of single strand magnet wire, Recognized Component - Magnet Wire (OBMW2), rated a minimum of 80 deg C. Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor. AWG size to be determined by the DC Resistance Test per UL 1581.

Insulation	FRPE, 15 mils min average, 13 mils minimum at any point, before and after ripping.

Assembly	Two to 100 conductors laid parallel and in one plane with a single row of conductors having 15 mils minimum distance between conductors. Same or mixed sizes of conductors.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General. The following user instructions shall be plainly marked on the tag or reels as follows: "Litz conductors are manufactured using solderable magnet wire".

Use	Internal wiring of appliances.