UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21641
                        
                            Issued:2009-06-30
                    
                            Revised:2019-11-07
                    
                            Style
                            21641
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 150 Vac, Horizontal flame.
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional inner layer.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			0.425 inches or less*30 mils min average24 mils minimum at any point
		
			0.426-0.700 dia45 avg36 min
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21641	Issued:2009-06-30
			Revised:2019-11-07


Rating	105 deg C, 150 Vac, Horizontal flame.

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional inner layer.

Jacket	Extruded PVC
	dia of cable under jacket
	0.425 inches or less*	30 mils min average	24 mils minimum at any point
	0.426-0.700 dia	45 avg	36 min
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.