UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2165
                        
                            Issued:1959-05-01
                    
                            Revised:2012-03-09
                    
                            Style
                            2165
                        
                            Parallel Cable with Extruded Insulation and Extruded Non-Integral Jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor22 AWG, consisting of seven strands of 30 AWG, tinned or bare.
		
			Insulated ConductorOne conductor shall be insulated with PVC.  The other conductor shall be insulated with Polyethylene
		
			InsulationExtruded PE and extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo conductors laid parallel, shielding over the PE insulated conductor, with outer non-integral PVC jacket.
		
			ShieldShielding over the polyethylene - insulated conductor shall consist of No. 36-30 AWG tinned or untinned strands applied as a wrap.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs phonograph pick-up cable.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2165	Issued:1959-05-01
			Revised:2012-03-09


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	22 AWG, consisting of seven strands of 30 AWG, tinned or bare.

Insulated Conductor	One conductor shall be insulated with PVC. The other conductor shall be insulated with Polyethylene

Insulation	Extruded PE and extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two conductors laid parallel, shielding over the PE insulated conductor, with outer non-integral PVC jacket.

Shield	Shielding over the polyethylene - insulated conductor shall consist of No. 36-30 AWG tinned or untinned strands applied as a wrap.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As phonograph pick-up cable.