UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21650
                        
                            Issued:2009-09-04
                    
                            Revised:2011-10-17
                    
                            Style
                            21650
                        
                            Multiple conductor cable using extruded non-integral jacket.
                    
			Rating150 deg C, 300 Vac, Horizontal flame, Cable flame. Optional - 60 or 80 deg C Oil, Gasoline Resistant.
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder, fillers and/or an extruded filler of Silicone Rubber may be employed.
		
			ShieldOptional.
		
			CoveringOptional. Extruded FEP.
		
			BraidOptional.
		
			JacketExtruded FEP
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.250 inches or less8 mils6 mils
		
			0.251-0.350 inches10 mils8 mils
		
			0.351-0.500 inches13 mils10 mils
		
			0.501-0.700 inches15 mils12 mils
		
			0.701-1.500 inches20 mils16 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or Internal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21650	Issued:2009-09-04
			Revised:2011-10-17


Rating	150 deg C, 300 Vac, Horizontal flame, Cable flame. Optional - 60 or 80 deg C Oil, Gasoline Resistant.

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder, fillers and/or an extruded filler of Silicone Rubber may be employed.

Shield	Optional.

Covering	Optional. Extruded FEP.

Braid	Optional.

Jacket	Extruded FEP
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.250 inches or less	8 mils	6 mils
	0.251-0.350 inches	10 mils	8 mils
	0.351-0.500 inches	13 mils	10 mils
	0.501-0.700 inches	15 mils	12 mils
	0.701-1.500 inches	20 mils	16 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or Internal wiring of appliances.