UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21651
                        
                            Issued:2009-09-04
                    
                            Revised:2017-09-07
                    
                            Style
                            21651
                        
                            Mutiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame. Optional - 60 or 80 deg C Oil. Optional - Gasoline Resistant.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder, fillers and/or an extruded filler of Silicone Rubber may be employed.
		
			ShieldOptional.
		
			CoveringOptional Extruded FEP.
		
			BraidOptional.
		
			JacketExtruded FEP
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.250 inch or less8 mils6 mils
		
			0.251-0.350 inch10 mils8 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or Internal wiring of appliances. In addition, the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; oil at 60 deg C or 80 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21651	Issued:2009-09-04
			Revised:2017-09-07


Rating	150 deg C, 600 Vac, Cable flame. Optional - 60 or 80 deg C Oil. Optional - Gasoline Resistant.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder, fillers and/or an extruded filler of Silicone Rubber may be employed.

Shield	Optional.

Covering	Optional Extruded FEP.

Braid	Optional.

Jacket	Extruded FEP
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.250 inch or less	8 mils	6 mils
	0.251-0.350 inch	10 mils	8 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or Internal wiring of appliances. In addition, the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; oil at 60 deg C or 80 deg C.