UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21654
                        
                            Issued:2009-09-04
                    
                            Revised:2019-11-07
                    
                            Style
                            21654
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating200 deg C, 300 Vac Cable flame. Optional: 60C or 80C Oil Res & Gas Res.
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder, fillers and/or an extruded filler of Silicone Rubber may be employed.
		
			ShieldOptional.
		
			CoveringOptional FEP.
		
			BraidOptional.
		
			JacketFEP
		
			dia in inches
		
			0.250 or less8 mils min average6 mils min at any point
		
			0.251-0.350 dia10 avg8 min
		
			0.351-0.500 dia13 avg10 min
		
			0.501-0.700 dia15 avg12 min
		
			0.701-1.500 dia20 avg16 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or Internal wiring of appliances. In addition, the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; oil at 60 deg C or 80 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21654	Issued:2009-09-04
			Revised:2019-11-07


Rating	200 deg C, 300 Vac Cable flame. Optional: 60C or 80C Oil Res & Gas Res.

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder, fillers and/or an extruded filler of Silicone Rubber may be employed.

Shield	Optional.

Covering	Optional FEP.

Braid	Optional.

Jacket	FEP
	dia in inches
	0.250 or less	8 mils min average	6 mils min at any point
	0.251-0.350 dia	10 avg	8 min
	0.351-0.500 dia	13 avg	10 min
	0.501-0.700 dia	15 avg	12 min
	0.701-1.500 dia	20 avg	16 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or Internal wiring of appliances. In addition, the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; oil at 60 deg C or 80 deg C.