UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21656
                        
                            Issued:2009-09-18
                    
                            Revised:2011-11-24
                    
                            Style
                            21656
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Cable Flame, VW-1 Flame.
		
			Conductor24 AWG - 16 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure with min rating of 60 deg C, 300V and 12 mils min average thickness.
		
			AssemblyFour or more singles and optical fiber members cabled around the strength member. Optical fiber core - Construction not specified. Strength Member - Stranded steel with minimum 12 mils of polyethylene or PVC covering. The length of lay of twisted singles is not specified. Fillers and/or barrier layer optional and their materials are not specified. Manufacturer shall maintain a complete description of each assembly.
		
			BraidMetal braid only.
		
			JacketTPU - POLYURETHANE, 62 mils min average, 50 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21656	Issued:2009-09-18
			Revised:2011-11-24


Rating	60 deg C, 300 Vac, Cable Flame, VW-1 Flame.

Conductor	24 AWG - 16 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure with min rating of 60 deg C, 300V and 12 mils min average thickness.

Assembly	Four or more singles and optical fiber members cabled around the strength member. Optical fiber core - Construction not specified. Strength Member - Stranded steel with minimum 12 mils of polyethylene or PVC covering. The length of lay of twisted singles is not specified. Fillers and/or barrier layer optional and their materials are not specified. Manufacturer shall maintain a complete description of each assembly.

Braid	Metal braid only.

Jacket	TPU - POLYURETHANE, 62 mils min average, 50 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.