UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2166
                        
                            Issued:1959-05-01
                    
                            Revised:2011-09-22
                    
                            Style
                            2166
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor20 AWG - 16 AWG, using No. 30 AWG or smaller tinned copper strands.
		
			InsulationExtruded PE and extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyThree conductors, one 20 AWG PE insulated conductor and two 16 AWG PVC insulated conductors.  Over the PE insulated conductor a copper shielding shall be applied as a braid or wrap.  Conductors shall be twisted together with a maximum lay of 2 1/2 inches.  The use of fillers is optional, valleys between conductors may show through jacket.
		
			ShieldOver the PE insulated conductor, copper braid or wrap.
		
			FillerOptional.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseOrgan Cable.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2166	Issued:1959-05-01
			Revised:2011-09-22


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	20 AWG - 16 AWG, using No. 30 AWG or smaller tinned copper strands.

Insulation	Extruded PE and extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Three conductors, one 20 AWG PE insulated conductor and two 16 AWG PVC insulated conductors. Over the PE insulated conductor a copper shielding shall be applied as a braid or wrap. Conductors shall be twisted together with a maximum lay of 2 1/2 inches. The use of fillers is optional, valleys between conductors may show through jacket.

Shield	Over the PE insulated conductor, copper braid or wrap.

Filler	Optional.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Organ Cable.