UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21666
                        
                            Issued:2010-02-05
                    
                            Revised:2012-04-18
                    
                            Style
                            21666
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac Horizontal flame.
		
			AssemblyOne or more jacketed cables are laid parallel and heat bonded together to form a flat cable. Optional one or more PVC-covered, Nylon Hollow Tubes may be heat bonded between or on the side(s) of the jacketed cables. If the cable construction is rippable, measurements of jacket thickness shall be made after ripping.
		
			CoveringPVC outer layer extruded over Nylon Hollow Tubes. Thickness same as one of labeled PVC jacket.
		
			JacketLabeled or complying with manufacturer's AWM Procedure with a minimum rating of 80 deg C, 30 Vac.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring, Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21666	Issued:2010-02-05
			Revised:2012-04-18


Rating	80 deg C, 30 Vac Horizontal flame.

Assembly	One or more jacketed cables are laid parallel and heat bonded together to form a flat cable. Optional one or more PVC-covered, Nylon Hollow Tubes may be heat bonded between or on the side(s) of the jacketed cables. If the cable construction is rippable, measurements of jacket thickness shall be made after ripping.

Covering	PVC outer layer extruded over Nylon Hollow Tubes. Thickness same as one of labeled PVC jacket.

Jacket	Labeled or complying with manufacturer's AWM Procedure with a minimum rating of 80 deg C, 30 Vac.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring, Class 2 circuits only.