UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2167
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-04
                    
                            Style
                            2167
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			ConductorA and B - 18 AWG and C, D and E - 20 AWG, each consisting of 30 AWG strands of metal coated copper.
		
			InsulationExtruded PVC, 30 mils minimum average, 27 mils minimum at any point. Same as for Type SJT cord. Colors: A-Gray, B-Blue, C-Red, D-Black, E-White.
		
			AssemblyFive conductors. Conductor E shall be provided with a brown cotton braid over the insulation. C & D shall be twisted together with a 1 1/2 inch max. right-hand lay. A, B and E and the combined Conductors C & D, together with cotton or jute fillers shall be twisted with a 3 1/2 inch max. left-hand lay. A cotton serve shall be applied over the conductor assembly.
		
			JacketSame as for Type SJT cord.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseFor Use with Electric Organ.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2167	Issued:1959-05-01
			Revised:2012-04-04


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	A and B - 18 AWG and C, D and E - 20 AWG, each consisting of 30 AWG strands of metal coated copper.

Insulation	Extruded PVC, 30 mils minimum average, 27 mils minimum at any point. Same as for Type SJT cord. Colors: A-Gray, B-Blue, C-Red, D-Black, E-White.

Assembly	Five conductors. Conductor E shall be provided with a brown cotton braid over the insulation. C & D shall be twisted together with a 1 1/2 inch max. right-hand lay. A, B and E and the combined Conductors C & D, together with cotton or jute fillers shall be twisted with a 3 1/2 inch max. left-hand lay. A cotton serve shall be applied over the conductor assembly.

Jacket	Same as for Type SJT cord.

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	For Use with Electric Organ.