UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21671
                        
                            Issued:2010-04-09
                    
                            Revised:2012-03-06
                    
                            Style
                            21671
                        
                            Multiple-conductor using non-integral jacket
                    
			Rating80 deg C, no voltage specified.
		
			Conductor40 AWG - 16 AWG min. solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo to 12 groups of Labeled multi-conductor jacketed AWM cable or two to twelve groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equal to or exceeding the rating of the cable. These groups are laid parallel with an overall expanded PTFE jacket with polyurethane adhesive and these groups are joined together by an interconnecting web. The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG.  May employ polyurethane tubing cores.
		
			ShieldOptional.  Maybe be either over the assemblies or coverings.
		
			CoveringOptional, inner layer.
		
			JacketExpanded PTFE with non-separable Inner Polyurethane Layer;  16 mils total min average thickness, 13 mils total min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing into Cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21671	Issued:2010-04-09
			Revised:2012-03-06


Rating	80 deg C, no voltage specified.

Conductor	40 AWG - 16 AWG min. solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two to 12 groups of Labeled multi-conductor jacketed AWM cable or two to twelve groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equal to or exceeding the rating of the cable. These groups are laid parallel with an overall expanded PTFE jacket with polyurethane adhesive and these groups are joined together by an interconnecting web. The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG. May employ polyurethane tubing cores.

Shield	Optional. Maybe be either over the assemblies or coverings.

Covering	Optional, inner layer.

Jacket	Expanded PTFE with non-separable Inner Polyurethane Layer; 16 mils total min average thickness, 13 mils total min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing into Cables.