UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2168
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-24
                    
                            Style
                            2168
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			ConductorA and B - 18 AWG, and C, D, and E - 20 AWG, each consisting of 30 AWG strands.
		
			InsulationSame as for Type SJT Cord. Colors:  A-Gray, B-Blue, C-Red, D-Black, E-White or Brown.

			AssemblyFive conductors, same as for Type SJT cord.

Conductor E when white, shall be provided with a brown cotton braid over the insulation. A tinned-copper braid or spiral wrap shield (four 36 AWG strands in each of 16 carries) shall be applied over the cotton braid or insulation. C and D shall be twisted together with a 1-1/2 inches max. right-hand lay. A, B, and E and the combined conductors C and D, together with cotton or jute fillers shall be twisted with a 5 inches max. left-hand lay. A cotton serve shall be applied over the conductor assembly.
		
			JacketSame as for Type SJT Cord.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseFor Use with Electric Organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2168	Issued:1959-05-01
			Revised:2012-04-24


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	A and B - 18 AWG, and C, D, and E - 20 AWG, each consisting of 30 AWG strands.

Insulation	Same as for Type SJT Cord. Colors: A-Gray, B-Blue, C-Red, D-Black, E-White or Brown.

Assembly	Five conductors, same as for Type SJT cord. Conductor E when white, shall be provided with a brown cotton braid over the insulation. A tinned-copper braid or spiral wrap shield (four 36 AWG strands in each of 16 carries) shall be applied over the cotton braid or insulation. C and D shall be twisted together with a 1-1/2 inches max. right-hand lay. A, B, and E and the combined conductors C and D, together with cotton or jute fillers shall be twisted with a 5 inches max. left-hand lay. A cotton serve shall be applied over the conductor assembly.

Jacket	Same as for Type SJT Cord.

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	For Use with Electric Organs.