UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21686
                        
                            Issued:2010-05-24
                    
                            Revised:2012-04-04
                    
                            Style
                            21686
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo to six subunits laid parallel and joined together with or without a web to form a flat cable.  Each subunit consists of two or more insulated conductors and jacket, with optional filler, covering and shield.  Width or thickness of web not specified.
		
			ShieldOptional, provided in subunit.
		
			CoveringOptional, provided in subunit.
		
			JacketExtruded TPU, 15 mils minimum average, 12 mils minimum at any point.  For rippable construction, jacket thickness shall be measured after ripping.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21686	Issued:2010-05-24
			Revised:2012-04-04


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two to six subunits laid parallel and joined together with or without a web to form a flat cable. Each subunit consists of two or more insulated conductors and jacket, with optional filler, covering and shield. Width or thickness of web not specified.

Shield	Optional, provided in subunit.

Covering	Optional, provided in subunit.

Jacket	Extruded TPU, 15 mils minimum average, 12 mils minimum at any point. For rippable construction, jacket thickness shall be measured after ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.