UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2169
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-19
                    
                            Style
                            2169
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor20 AWG - 16 AWG, stranded, consisting of 30 AWG or smaller strands, tinned copper. 
CONSTRUCTION A and B - 20 AWG. CONSTRUCTION C and D - 16 AWG.
		
			InsulationExtruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
CONSTRUCTION A - White. CONSTRUCTION B - Brown. CONSTRUCTION C - Red. CONSTRUCTION D - Black.
		
			AssemblyFour insulated conductors, same as type SJT. The conductors shall be combined with cotton, or jute fillers and twisted together with a 3.5 inches maximum. right-hand lay. A cotton serve shall be applied over the conductor assembly.
		
			ShieldConductor A shall be provided with a tinned copper braid shield (four 36 AWG strands in each of sixteen carriers).
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseFor Use with Electric Organs.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2169	Issued:1959-05-01
			Revised:2012-04-19


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	20 AWG - 16 AWG, stranded, consisting of 30 AWG or smaller strands, tinned copper. CONSTRUCTION A and B - 20 AWG. CONSTRUCTION C and D - 16 AWG.

Insulation	Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point. CONSTRUCTION A - White. CONSTRUCTION B - Brown. CONSTRUCTION C - Red. CONSTRUCTION D - Black.

Assembly	Four insulated conductors, same as type SJT. The conductors shall be combined with cotton, or jute fillers and twisted together with a 3.5 inches maximum. right-hand lay. A cotton serve shall be applied over the conductor assembly.

Shield	Conductor A shall be provided with a tinned copper braid shield (four 36 AWG strands in each of sixteen carriers).

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	For Use with Electric Organs.