UL iQ™ for Appliance Wiring Materials

APPLIANCE WIRING MATERIAL

Subj.758	Section 2	Page 2170	Issued:1959-05-01
			Revised:2008-05-27

Style 2170

SJT Cord.

Rating

60 deg C, 300 Vac, FT2 flame.

Conductor

22 - 20 AWG, each consisting of No. 30 AWG or smaller tinned copper strands.

Insulation

PVC, 15 mils min average, 14 mils minimum at any point. A, B and C shall have a nominal 15 mil wall, D and E shall have a nominal 30 mil inch wall.

Assembly

Five conductors, same as type SJT. A, B and C No. 22 AWG, D and E No. 20 AWG, each consisting of No. 30 AWG or smaller tinned copper strands. A, B and C shall have a nominal 15 mil wall, D and E shall have a nominal 30 mil inch wall. All conductors shall be provided with a lacquered rayon braid. Conductors A, B, and C shall be provided with a copper braid shield (six No. 40 AWG strands in each of sixteen carriers, eighteen picks per inch). The conductors shall be combined with cotton or jute fillers and twisted together with a 3 1/2 inch max. right-hand lay. A cotton serve shall be applied over the conductor assembly.

Jacket

PVC, 30 mils min average, 24 mils minimum at any point.

Standard

Appliance Wiring Material UL 758.

Marking

General

Use	For Use with Electric Organs.