UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21704
                        
                            Issued:2010-07-30
                    
                            Revised:2011-11-24
                    
                            Style
                            21704
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating105 deg C, 1000 Vac, Cable flame, Optional 60C Oil Resistant & Gasoline Resistant.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional inner layer.
		
			JacketPVC
		
			Diameter of round assembly under jacket or equivalent diameter of flat assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0 - 0.400 in30 mils24 mils
		
			0.401 - 0.700 in30 mils24 mils
		
			0.701 - 1.000 in45 mils36 mils
		
			1.001 - 1.500 in60 mils48 mils
		
			1.501 - 2.500 in80 mils64 mils
		
			- For flat assembly, calculated as 1.1284 x (TW)1/2 in which T is the thickness of the assembly under the jacket and W is the width of the assembly under the jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21704	Issued:2010-07-30
			Revised:2011-11-24


Rating	105 deg C, 1000 Vac, Cable flame, Optional 60C Oil Resistant & Gasoline Resistant.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional inner layer.

Jacket	PVC
	Diameter of round assembly under jacket or equivalent diameter of flat assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0 - 0.400 in	30 mils	24 mils
	0.401 - 0.700 in	30 mils	24 mils
	0.701 - 1.000 in	45 mils	36 mils
	1.001 - 1.500 in	60 mils	48 mils
	1.501 - 2.500 in	80 mils	64 mils
	- For flat assembly, calculated as 1.1284 x (TW)1/2 in which T is the thickness of the assembly under the jacket and W is the width of the assembly under the jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring