UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21714
                        
                            Issued:2010-09-03
                    
                            Revised:2012-04-01
                    
                            Style
                            21714
                        
                            Multiple-conductor cable with non-integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor17 or 16 AWG, solid or stranded.
Conductive core - Extruded TPE compound filled with special carbon, provided over each conductor and between conductors. Not evaluated as self-regulating heating core.
		
			InsulationInner Insulation - TPU, 12 mils minimum average thickness, 11 mils minimum thickness at any point.
Outer Insulation - TPE, 18 mils minimum average thickness, 16 mils minimum thickness at any point. Each insulation layer separable.
		
			AssemblyTwo conductors laid parallel, covered by conductive core, covered by two layers of insulation, covered by shield, covered by jacket to form a flat cable.
		
			ShieldRequired.
		
			JacketTPE, 32 mils minimum average thickness, 26 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21714	Issued:2010-09-03
			Revised:2012-04-01


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	17 or 16 AWG, solid or stranded. Conductive core - Extruded TPE compound filled with special carbon, provided over each conductor and between conductors. Not evaluated as self-regulating heating core.

Insulation	Inner Insulation - TPU, 12 mils minimum average thickness, 11 mils minimum thickness at any point. Outer Insulation - TPE, 18 mils minimum average thickness, 16 mils minimum thickness at any point. Each insulation layer separable.

Assembly	Two conductors laid parallel, covered by conductive core, covered by two layers of insulation, covered by shield, covered by jacket to form a flat cable.

Shield	Required.

Jacket	TPE, 32 mils minimum average thickness, 26 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.