UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21715
                        
                            Issued:2010-09-03
                    
                            Revised:2012-03-31
                    
                            Style
                            21715
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor17 or 16 AWG, solid or stranded.
Conductive core - Extruded TPE compound filled with special carbon, provided over each conductor and between conductors. Not evaluated as self-regulating heating core.
		
			InsulationInner Insulation - Extruded TPU, 12 mils minimum average thickness, 11 mils minimum thickness at any point.
Outer Insulation - Extruded TPE, 18 mils minimum average thickness, 16 mils minimum thickness at any point. Each insulation layer separable.
		
			AssemblyTwo conductors laid parallel, covered by conductive core, covered by two layers of insulation, covered by shield, covered by jacket to form a flat cable.
		
			ShieldRequired.
		
			JacketExtruded TPE.
		
			Diameter of cableMinimumMinimum at any point
		
			under jacket inchesaverage milspoint mils
		
			0.700 or less3226
		
			0.701 - 1.0004536
		
			1.001 - 1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21715	Issued:2010-09-03
			Revised:2012-03-31


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	17 or 16 AWG, solid or stranded. Conductive core - Extruded TPE compound filled with special carbon, provided over each conductor and between conductors. Not evaluated as self-regulating heating core.

Insulation	Inner Insulation - Extruded TPU, 12 mils minimum average thickness, 11 mils minimum thickness at any point. Outer Insulation - Extruded TPE, 18 mils minimum average thickness, 16 mils minimum thickness at any point. Each insulation layer separable.

Assembly	Two conductors laid parallel, covered by conductive core, covered by two layers of insulation, covered by shield, covered by jacket to form a flat cable.

Shield	Required.

Jacket	Extruded TPE.
	Diameter of cable	Minimum	Minimum at any point
	under jacket inches	average mils	point mils
	0.700 or less	32	26
	0.701 - 1.000	45	36
	1.001 - 1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.