UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21720
                        
                            Issued:2010-09-30
                    
                            Revised:2011-11-11
                    
                            Style
                            21720
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor50 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded TPES - THERMOPLASTIC POLYESTER, 9 mils min average, 8 mils min at any point.  
See Facing Page for Compound.
		
			AssemblyTwo insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together.  All conductors in any group twisted together.   Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldAl/Polyester tape or metal braid provided under the overall jacket.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21720	Issued:2010-09-30
			Revised:2011-11-11


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	50 AWG - 10 AWG, solid or stranded.

Insulation	Extruded TPES - THERMOPLASTIC POLYESTER, 9 mils min average, 8 mils min at any point. See Facing Page for Compound.

Assembly	Two insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Al/Polyester tape or metal braid provided under the overall jacket.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.