UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21725
                        
                            Issued:2010-10-05
                    
                            Revised:2012-03-30
                    
                            Style
                            21725
                        
                            Multi-conductor cable using non-integral jacket
                    
			Rating105 deg C, 300 Vac, No Flame Rating.
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationExtruded TPES - THERMOPLASTIC POLYESTER, 9 mils min average, 8 mils min at any point.  See Facing Page for Compound.
		
			AssemblyTwo insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together.  All conductors in any group twisted together.   Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional - Metal tape or braid.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc..
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21725	Issued:2010-10-05
			Revised:2012-03-30


Rating	105 deg C, 300 Vac, No Flame Rating.

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	Extruded TPES - THERMOPLASTIC POLYESTER, 9 mils min average, 8 mils min at any point. See Facing Page for Compound.

Assembly	Two insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional - Metal tape or braid.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc..