UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21726
                        
                            Issued:2010-10-05
                    
                            Revised:2011-08-29
                    
                            Style
                            21726
                        
                            Multiple conductor cable using extruded non-integral jacket
                    
			Rating105 deg C, 300 V, No Flame Rating.
		
			Conductor50 AWG - 10 AWG solid or stranded.
		
			InsulationExtruded TPES, 9 mils minimum average thickness, 8 mils minimum thickness at any point.  See Facing Page for Compound Designation.
		
			AssemblyTwo insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together.  All conductors in any group twisted together.   Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			ShieldAn optional shield may be provided under the extruded Inner Jacket and/or under the extruded Outer Jacket.
		
			JacketExtruded inner jacket PVC, 30 mils minimum average thickness, 24 mils minimum thicknessat any point.  Extruded outer acket PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21726	Issued:2010-10-05
			Revised:2011-08-29


Rating	105 deg C, 300 V, No Flame Rating.

Conductor	50 AWG - 10 AWG solid or stranded.

Insulation	Extruded TPES, 9 mils minimum average thickness, 8 mils minimum thickness at any point. See Facing Page for Compound Designation.

Assembly	Two insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	An optional shield may be provided under the extruded Inner Jacket and/or under the extruded Outer Jacket.

Jacket	Extruded inner jacket PVC, 30 mils minimum average thickness, 24 mils minimum thicknessat any point. Extruded outer acket PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc.