UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21729
                        
                            Issued:2010-10-05
                    
                            Revised:2011-09-28
                    
                            Style
                            21729
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating90 deg C, 300 V
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationETFE, 9 mils min average, 8 mils min at any point.
		
			AssemblyTwo insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together.  All conductors in any group twisted together.   Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional - A metal braid and/or a metal tape shield may be provided under the jacket.
		
			JacketPUR - POLYURETHANE, 16 mils min average, 13 mils minimum at any point.  See Facing Page for Compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21729	Issued:2010-10-05
			Revised:2011-09-28


Rating	90 deg C, 300 V

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	ETFE, 9 mils min average, 8 mils min at any point.

Assembly	Two insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional - A metal braid and/or a metal tape shield may be provided under the jacket.

Jacket	PUR - POLYURETHANE, 16 mils min average, 13 mils minimum at any point. See Facing Page for Compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing as Resistance Heater Wire where the acceptability has been determined by Underwriters Laboratories Inc.