UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2173
                        
                            Issued:1959-05-01
                    
                            Revised:2019-10-11
                    
                            Style
                            2173
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor22 AWG - 16 AWG. 22 AWG consists of 8 strands 35 AWGr plus 2 strand 31 AWG. No. 18 AWG consists of 16 strands 30 AWG. 20 AWG consists of 10 strands 30 AWG.
		
			InsulationNominal 30 mils wall extruded PE and nominal 15 mils wall of extruded PVC.
		
			AssemblyFifteen conductors, Nos. 1, 2 & 3 - 8 strands
		
			35 AWG plus 2 strands
		
			31 AWG. Nos. 4, 5, 6, 7, 14 & 15 - No. 18 AWG (16 strands #30 AWG). Nos. 8, 9, 10, 11, 12, & 13 - No 20 AWG (10 strands #30 AWG). Nos. 1, 2 & 3 - Nominal 30 mils wall extruded PE covered by a closely braided shield of No. 36 AWG. Over the shield a nominal 30 mils wall of extruded PVC shall be applied. Nos. 4, 5, 6, 7, 12 & 13 - Nominal 30 mil wall of extruded PVC. Nos. 8, 9, 10, 11, 14 & 15 - Nominal 15 mil wall of extruded PVC. Twisted together with a lay of approximately 5-1/2 inches. Conductors 4, 5, and 6 shall be located on the opposite side of the cable from 7, 12 and 13.
		
			ShieldOptional.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs Remote Control Cable for Television Receiver.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2173	Issued:1959-05-01
			Revised:2019-10-11


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	22 AWG - 16 AWG. 22 AWG consists of 8 strands 35 AWGr plus 2 strand 31 AWG. No. 18 AWG consists of 16 strands 30 AWG. 20 AWG consists of 10 strands 30 AWG.

Insulation	Nominal 30 mils wall extruded PE and nominal 15 mils wall of extruded PVC.

Assembly	Fifteen conductors, Nos. 1, 2 & 3 - 8 strands
	35 AWG plus 2 strands
	31 AWG. Nos. 4, 5, 6, 7, 14 & 15 - No. 18 AWG (16 strands #30 AWG). Nos. 8, 9, 10, 11, 12, & 13 - No 20 AWG (10 strands #30 AWG). Nos. 1, 2 & 3 - Nominal 30 mils wall extruded PE covered by a closely braided shield of No. 36 AWG. Over the shield a nominal 30 mils wall of extruded PVC shall be applied. Nos. 4, 5, 6, 7, 12 & 13 - Nominal 30 mil wall of extruded PVC. Nos. 8, 9, 10, 11, 14 & 15 - Nominal 15 mil wall of extruded PVC. Twisted together with a lay of approximately 5-1/2 inches. Conductors 4, 5, and 6 shall be located on the opposite side of the cable from 7, 12 and 13.

Shield	Optional.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As Remote Control Cable for Television Receiver.