UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2175
                        
                            Issued:1959-05-01
                    
                            Revised:2011-10-19
                    
                            Style
                            2175
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor18 AWG consisting of No.34 AWG or smaller, stranded, tinned copper.
		
			InsulationIntegral with Jacket. Extruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			AssemblyFour conductors, same as type STP-3, except the insulation thickness is increased to approximately 95 mil on the edges of the cord, and the grooves between the conductors are shallow, intended for appearance only and not for ripping.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseTelevision Remote Control Cable.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2175	Issued:1959-05-01
			Revised:2011-10-19


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	18 AWG consisting of No.34 AWG or smaller, stranded, tinned copper.

Insulation	Integral with Jacket. Extruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Assembly	Four conductors, same as type STP-3, except the insulation thickness is increased to approximately 95 mil on the edges of the cord, and the grooves between the conductors are shallow, intended for appearance only and not for ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Television Remote Control Cable.