UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2176
                        
                            Issued:1959-05-01
                    
                            Revised:2011-10-10
                    
                            Style
                            2176
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, FT2 flame.
		
			Conductor20 AWG each consisting of 26 strands of No. 34 AWG.
		
			InsulationExtruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyFive conductors, same as type SJT, Conductors shall be cabled into a concentric cable with a cotton or jute center filler. A cotton wrap shall be applied over the conductor assembly.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2176	Issued:1959-05-01
			Revised:2011-10-10


Rating	60 deg C, 300 Vac, FT2 flame.

Conductor	20 AWG each consisting of 26 strands of No. 34 AWG.

Insulation	Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Five conductors, same as type SJT, Conductors shall be cabled into a concentric cable with a cotton or jute center filler. A cotton wrap shall be applied over the conductor assembly.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.