UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21792
                        
                            Issued:2011-11-01
                    
                            Revised:New
                    
                            Style
                            21792
                        
                            Multiconductor with Non-Extruded Insulation and Extruded Non-Integral Jacket.
                    
			Rating80 deg C,300 Vac, Horizontal Flame.
		
			Conductor36 AWG - 22 AWG, Solid or Stranded Round.
		
			SeparatorOptional - Foamed PTFE Tape.
		
			InsulationNon-Extruded PTFE, 5 mils minimum average or 4 mils min at any point.
		
			Inner BarrierOptional - Foamed PTFE or Polyester Tape.
		
			Outer BarrierOptional - Foamed PTFE or Polyester Tape.
		
			ShieldOptional.
		
			JacketExtruded TPU, 17 mils minimum average thickness, 14 mils minimum at any point.
		
			AssemblyTwo or more insulated  conductors laid parallel. Optional Separator over the conductor, optional inner barrier layer over the Insulated Conductors and optional outer barrier layer over the Inner Barrier Layer, optional shield and required Jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C,300 Vac, Horizontal Flame.

Conductor	36 AWG - 22 AWG, Solid or Stranded Round.

Separator	Optional - Foamed PTFE Tape.

Insulation	Non-Extruded PTFE, 5 mils minimum average or 4 mils min at any point.

Inner Barrier	Optional - Foamed PTFE or Polyester Tape.

Outer Barrier	Optional - Foamed PTFE or Polyester Tape.

Shield	Optional.

Jacket	Extruded TPU, 17 mils minimum average thickness, 14 mils minimum at any point.

Assembly	Two or more insulated conductors laid parallel. Optional Separator over the conductor, optional inner barrier layer over the Insulated Conductors and optional outer barrier layer over the Inner Barrier Layer, optional shield and required Jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.