UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21844
                        
                            Issued:2012-05-04
                    
                            Revised:2012-05-07
                    
                            Style
                            21844
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. Each insulated conductor pair shall be shielded.
		
			Inner ShieldInner metal tape shall be provided over each conductor pair.
		
			Binder TapeOptional binder tape may be provided over the conductor core.
		
			CoveringOptional - Inner extruded PVC covering may be provided.
		
			Outer ShieldAn outer metal tape shall be provided.
		
			BraidAn outer metal braid shall be provided under the overall jacket.
		
			JacketExtruded PVC, 25 mils minimum average thickness, 20 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21844	Issued:2012-05-04
			Revised:2012-05-07


Rating	60 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. Each insulated conductor pair shall be shielded.

Inner Shield	Inner metal tape shall be provided over each conductor pair.

Binder Tape	Optional binder tape may be provided over the conductor core.

Covering	Optional - Inner extruded PVC covering may be provided.

Outer Shield	An outer metal tape shall be provided.

Braid	An outer metal braid shall be provided under the overall jacket.

Jacket	Extruded PVC, 25 mils minimum average thickness, 20 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring in Class 2 Circuits only.