UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21855
                        
                            Issued:2012-05-31
                    
                            Revised:New
                    
                            Style
                            21855
                        
                            Multi-conductor cable using non-integral jacket
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together; or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldRequired metal tape or metal braid shall be provided under the overall jacket.
		
			JacketExtruded mPPE-PE
		
			Dia of Cable under jacketMin averageMinimum at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together; or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Required metal tape or metal braid shall be provided under the overall jacket.

Jacket	Extruded mPPE-PE
	Dia of Cable under jacket	Min average	Minimum at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.