UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21865
                        
                            Issued:2012-07-06
                    
                            Revised:2019-11-07
                    
                            Style
                            21865
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 30 V ac, Cable flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more insulated conductors, twisted pairs, groups of twisted conductors or singles or groups of singles laid parallel to form flat, oval or round cable. A barrier layer and/or fillers are optional.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded Thermoplastic Fluoropolymer. See facing page for compound designation and mixture ratio.;
		
			dia under jacket in inches
		
			0.350 or less10 mils minimum average thickness8 mils minimum thickness at any point
		
			0.351 - 0.500 dia13 avg10 min
		
			0.501 - 0.700 dia15 avg12 min
		
			0.701 - 1.500 dia20 avg16 min
		
			1.501 - 2.500 dia30 avg24 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21865	Issued:2012-07-06
			Revised:2019-11-07


Rating	150 deg C, 30 V ac, Cable flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more insulated conductors, twisted pairs, groups of twisted conductors or singles or groups of singles laid parallel to form flat, oval or round cable. A barrier layer and/or fillers are optional.

Shield	Optional.

Covering	Optional.

Jacket	Extruded Thermoplastic Fluoropolymer. See facing page for compound designation and mixture ratio.;
	dia under jacket in inches
	0.350 or less	10 mils minimum average thickness	8 mils minimum thickness at any point
	0.351 - 0.500 dia	13 avg	10 min
	0.501 - 0.700 dia	15 avg	12 min
	0.701 - 1.500 dia	20 avg	16 min
	1.501 - 2.500 dia	30 avg	24 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.