UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21874
                        
                            Issued:2012-09-26
                    
                            Revised:2014-05-02
                    
                            Style
                            21874
                        
                            Multiple-Conductor Cable with Shield
                    
			Rating105 deg C, 300 Vac
		
			Conductor50 AWG - 19 AWG, Solid or Stranded Round.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure or Extruded ETFE, 9 mils minimum average thickness, 8 mils minimum at any point.
		
			Assembly2 conductors twisted together.
		
			ShieldStainless Steel Braid with minimum 85% coverage or a tape foil minimum 1.5 mils thick with minimum 25% overlap and a drain wire.
		
			CoveringOptional
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing as Resistance Heater Wire where the acceptability has been determined by UL LLC
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21874	Issued:2012-09-26
			Revised:2014-05-02


Rating	105 deg C, 300 Vac

Conductor	50 AWG - 19 AWG, Solid or Stranded Round.

Insulation	Labeled or complying with manufacturer's AWM Procedure or Extruded ETFE, 9 mils minimum average thickness, 8 mils minimum at any point.

Assembly	2 conductors twisted together.

Shield	Stainless Steel Braid with minimum 85% coverage or a tape foil minimum 1.5 mils thick with minimum 25% overlap and a drain wire.

Covering	Optional

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing as Resistance Heater Wire where the acceptability has been determined by UL LLC