UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21876
                        
                            Issued:2012-10-11
                    
                            Revised:2012-10-31
                    
                            Style
                            21876
                        
                            Multiple-Conductor Cable using Non-Integral Jacket
                    
			Rating90 deg C, 600 Vac, Cable flame.
		
			Conductor30 AWG - 4/0 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.
		
			Covering(Optional) Extruded thermoplastic covering may be extruded over conductor assembly, 6 mils minimum thickness at any point.
		
			Shield(Optional) In accordance with the Standard.
		
			JacketExtruded FRPE
		
			Overall diameter (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2
.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or External Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21876	Issued:2012-10-11
			Revised:2012-10-31


Rating	90 deg C, 600 Vac, Cable flame.

Conductor	30 AWG - 4/0 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	(Optional) Extruded thermoplastic covering may be extruded over conductor assembly, 6 mils minimum thickness at any point.

Shield	(Optional) In accordance with the Standard.

Jacket	Extruded FRPE
	Overall diameter (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2 .500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or External Wiring.