UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21895
                        
                            Issued:2013-04-08
                    
                            Revised:New
                    
                            Style
                            21895
                        
                            Multiple-conductor cable using extruded non-integral jacket.
                    
			Rating105 deg C, No Voltage Specified, Cable flame; Oil Res 60 deg C (required); Sunlight Res (required).
		
			InsulationLabeled
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - Extruded PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC with minimum average 60 mils, minimum thickness at any point 48 mils for cables with a calculated diameter under the jacket of 0.700 inches or less.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	105 deg C, No Voltage Specified, Cable flame; Oil Res 60 deg C (required); Sunlight Res (required).

Insulation	Labeled

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded PVC, 6 mils minimum average thickness, 5 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded PVC with minimum average 60 mils, minimum thickness at any point 48 mils for cables with a calculated diameter under the jacket of 0.700 inches or less.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.