UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21898
                        
                            Issued:2013-06-07
                    
                            Revised:New
                    
                            Style
                            21898
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Horizonta flame; Oil Resistant 60 deg C (Optional).
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Inner ShieldOptional
		
			CoveringOptional
		
			Outer ShieldOptional
		
			JacketExtruded FEP, 10 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	150 deg C, 600 Vac, Horizonta flame; Oil Resistant 60 deg C (Optional).

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Inner Shield	Optional

Covering	Optional

Outer Shield	Optional

Jacket	Extruded FEP, 10 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.