UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21899
                        
                            Issued:2013-06-07
                    
                            Revised:New
                    
                            Style
                            21899
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C,600 Vac, Cable flame; Oil Resistant 60 deg C (Optional).
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Inner ShieldOptional
		
			CoveringOptional
		
			Outer ShieldOptional
		
			JacketExtruded FEP.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less10 mils8 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			1.501-2.500 inch30 mils24 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring Interconnection of Electronic Equipment or Appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	150 deg C,600 Vac, Cable flame; Oil Resistant 60 deg C (Optional).

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Inner Shield	Optional

Covering	Optional

Outer Shield	Optional

Jacket	Extruded FEP.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	10 mils	8 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils
	1.501-2.500 inch	30 mils	24 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring Interconnection of Electronic Equipment or Appliances.