UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21906
                        
                            Issued:2013-06-06
                    
                            Revised:New
                    
                            Style
                            21906
                        
                            Multiple-Conductor Using Non-Integral Jacket
                    
			Rating105 deg C, 600 Vac, Cable flame; Oil Res 60 C (optional); Moisture Res 75 C (optional); Sunlight Res (optional).
		
			ConductorSolid or stranded
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			JacketExtruded TPE
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.00 - 0.700 inch30 mils24 mils
		
			0.701 - 1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment or appliances
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	105 deg C, 600 Vac, Cable flame; Oil Res 60 C (optional); Moisture Res 75 C (optional); Sunlight Res (optional).

Conductor	Solid or stranded

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Jacket	Extruded TPE
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.00 - 0.700 inch	30 mils	24 mils
	0.701 - 1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment or appliances