UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21907
                        
                            Issued:2013-06-14
                    
                            Revised:New
                    
                            Style
                            21907
                        
                            Multiple-Conductor Cable Using Non-Integral Jacket
                    
			Rating90 deg C, 300 Vac, Cable flame; Oil Res 60 (optional); Sunlight Res (optional).
		
			Conductor50 AWG - 10 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional
		
			CoveringOptional
		
			JacketExtruded TPU - See Facing Page for compound
		
			Diameter of Cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 or less inch30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C, 300 Vac, Cable flame; Oil Res 60 (optional); Sunlight Res (optional).

Conductor	50 AWG - 10 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional

Covering	Optional

Jacket	Extruded TPU - See Facing Page for compound
	Diameter of Cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 or less inch	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.