UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21923
                        
                            Issued:2013-08-29
                    
                            Revised:2015-12-03
                    
                            Style
                            21923
                        
                            Multi-conductor cable with non-integral jacket
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a flat, oval or round cable. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded TPU with minimum average thickness 15 mils minimum thickness at any point 12 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21923	Issued:2013-08-29
			Revised:2015-12-03


Rating	105 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a flat, oval or round cable. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Covering	Optional.

Jacket	Extruded TPU with minimum average thickness 15 mils minimum thickness at any point 12 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.