UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21929
                        
                            Issued:2013-08-29
                    
                            Revised:New
                    
                            Style
                            21929
                        
                            Multi-conductor cable with non-integral jacket.
                    
			Rating105 deg C, 1000 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of
insulated conductors cabled together to form a round cable. A
flat or oval cable may also be constructed with not more than
three rows of single conductors or groups of conductors. The
length of lay of the twisted conductors or groups is not
specified. Fillers may be used in a cable but are not required. A
barrier layer, if employed, may be of fibrous wrap serving, or
braid; paper; nylon; oriented polyethylene terephthalate; or
thermoplastic-type wrap. Such a barrier layer would serve to
protect the cable during further processing and would be
applied immediately over the twisted assembly of individual
conductors or groups of conductors.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded TPU with minimum average thickness 15 mils minimum, minimum thickness at any point 13 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	105 deg C, 1000 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be of fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-type wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Covering	Optional.

Jacket	Extruded TPU with minimum average thickness 15 mils minimum, minimum thickness at any point 13 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.