UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21937
                        
                            Issued:2014-01-26
                    
                            Revised:New
                    
                            Style
                            21937
                        
                            Multiple-conductor Cable Using Non-Integral Jacket
                    
			Rating90 deg C,300 Vac, Cable flame.
		
			Conductor32 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded ETFE, 12 mils minimum average thickness, 10 mils minimum thickness at any point, rating 150 degree C and 300Vac
		
			AssemblyTwo or more insulated conductors laid parallel or twisted together to form cable core.

			ShieldPoly Aluminum Foil Tape 100 % coverage with Tin plated Copper drain wire or Copper braid with 65% minimum coverage 

			JacketExtruded PVC
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			*equivalent diameter = 1.1284 X (TW)1/2   if cable is flat or oval assembly. _T is the thickness of the assembly under the jacket and W is the width of the assembly under the jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C,300 Vac, Cable flame.

Conductor	32 AWG - 16 AWG, solid or stranded.

Insulation	Extruded ETFE, 12 mils minimum average thickness, 10 mils minimum thickness at any point, rating 150 degree C and 300Vac

Assembly	Two or more insulated conductors laid parallel or twisted together to form cable core.

Shield	Poly Aluminum Foil Tape 100 % coverage with Tin plated Copper drain wire or Copper braid with 65% minimum coverage

Jacket	Extruded PVC
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	*equivalent diameter = 1.1284 X (TW)1/2 if cable is flat or oval assembly. _T is the thickness of the assembly under the jacket and W is the width of the assembly under the jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.