UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21944
                        
                            Issued:2014-02-27
                    
                            Revised:New
                    
                            Style
                            21944
                        
                            Multiple Conductor Cable using Non-Integral Jacket
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled Style 11538
		
			AssemblyConsists of two or more conductors, twisted pairs, or groups of twisted conductors twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable.  The lay of the conductors is not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly. M ay use same or mixed AWG size.
		
			SeparatorOptional
		
			CoveringOptional
		
			ShieldOptional
		
			JacketExtruded TPU
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less35 mils28 mils
		
			0.701 - 1.000 inch60 mils48 mils
		
			1.001 - 1.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 600 Vac, Cable flame.

Insulation	Labeled Style 11538

Assembly	Consists of two or more conductors, twisted pairs, or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. M ay use same or mixed AWG size.

Separator	Optional

Covering	Optional

Shield	Optional

Jacket	Extruded TPU
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	35 mils	28 mils
	0.701 - 1.000 inch	60 mils	48 mils
	1.001 - 1.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.