UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21946
                        
                            Issued:2014-03-06
                    
                            Revised:New
                    
                            Style
                            21946
                        
                            Multiple conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor30 AWG - 10 AWG, solid or stranded.
		
			InsulationFRPE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay nor specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded FRPE;
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.00 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	30 AWG - 10 AWG, solid or stranded.

Insulation	FRPE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay nor specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	Extruded FRPE;
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.00 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.