UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21965
                        
                            Issued:2014-09-30
                    
                            Revised:2014-11-24
                    
                            Style
                            21965
                        
                            Multiple conductor cable using extruded insulation and extruded non-integral jacket
                    
			Rating90 deg C,60 Vac; 60 deg C Wet (required).
		
			Conductor44 AWG - 10 AWG, solid or stranded.
		
			InsulationRecognized Component QMTT2 Extruded PVC insulation suitable for Types THWN or THWN-2, 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			AssemblyConsists of two or more twisted conductors, twisted pairs, or groups of twisted conductors twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable.  A barrier layer and/or fillers are optional.
		
			JacketExtruded TPE, 40 mils minimum average thickness, 32 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21965	Issued:2014-09-30
			Revised:2014-11-24


Rating	90 deg C,60 Vac; 60 deg C Wet (required).

Conductor	44 AWG - 10 AWG, solid or stranded.

Insulation	Recognized Component QMTT2 Extruded PVC insulation suitable for Types THWN or THWN-2, 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Assembly	Consists of two or more twisted conductors, twisted pairs, or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional.

Jacket	Extruded TPE, 40 mils minimum average thickness, 32 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing.