UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21974
                        
                            Issued:2015-02-27
                    
                            Revised:New
                    
                            Style
                            21974
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating150 deg C, 300 Vac, Horizontal flame, Cable flame, Optional Sunlight Resistant.
		
			Conductor38 AWG - 1/0 AWG, solid or stranded.
		
			InsulationExtruded FEP, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded FEP.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less12 mils9 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			1.501-2.500 inch30 mils24 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring. In addition, the tag may also indicate the following: Suitable for Sunlight Resistant or Sun-Res.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	150 deg C, 300 Vac, Horizontal flame, Cable flame, Optional Sunlight Resistant.

Conductor	38 AWG - 1/0 AWG, solid or stranded.

Insulation	Extruded FEP, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	Extruded FEP.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	12 mils	9 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils
	1.501-2.500 inch	30 mils	24 mils


Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring. In addition, the tag may also indicate the following: Suitable for Sunlight Resistant or Sun-Res.